100g of 200 Mesh Flake Magnalium Alloy Powder Foundry Alloyed & Ball Milled

• Application: Aviation, Electronics, Industrial, Medical, Chemical
• Standard: JIS, GB, DIN, BS, ASTM, AISI
• Purity: >99.99%
• Shape: Rectangular
• Alloy: Non-alloy
• Secondary: Non-secondary
• Model NO.: HY-150
• Transport Package: Wooden Box
• Specification: 99.9%
• Trademark: HY
• Origin: China
• HS Code: 8104110000
• Production Capacity: 10000000000000000000000

Product Description

100g of 200 Mesh FLAKE Magnalium Alloy Powder Foundry Alloyed & Ball Milled

100g of 200 Mesh Magnalium SUPER FLAKE Hi-Energy Powder



Foundry Alloyed using Pure Magnesium & Pure Aluminum in equal Amount 50-50,

 

Then Ball-Milled into a Flake type Particle Powder ≤ 74 Micron
 
**100% Contaminant Free**
&
**Absolutely No Un-Alloyed Magnesium Particles Present**
 



This is NOT a simple mix of Pure Aluminum & Magnesium Powder !!
______


This Magnalium Metal Alloy Powder was produced entirely within Haoyu facilities!


Made in China !!

 

This product was ball-milled into this Superior 'Magnalium Alloy' Metal Fuel product, after the following procedures were successfully accomplished:

#1 - Pure Aluminum Metal and a block of pure Magnesium, equal in weight, were melted in the foundry furnace and alloyed into Magnalium (Which has it own unique melting Temp, Mass per cu.in, and other very unique and useful properties / characteristics).

#2 - This Liquid Alloy was then sealed off from oxygen and allowed to solidify into a solid metal casting. The transition from liquid to solid Magnalium is no small transformation regarding the value it gives to this product. It locks the volatile Magnesium particles into their alloyed bonds with the equally abundant Aluminum. The stabilizing of the liquid alloys temperature to room temp, ideally done with minimal elemental oxidation in order to preserve calculated ideal stoichiometric, completely stabilizes both the Aluminum and the Magnesium particles. They will not react with any of the chemical oxidizers that would normally cause pure magnesium, and/or Aluminum, to react or ignite upon contact.

      As long as there is no addition of heat from a fuse or flame, the Magnalium powder can be freely be substituted into any flash powder composition in the place of the pure or dark flake Aluminum powder.

#3 - The Cast Magnalium Brick is then ball milled into a metal powder.

Bottom Line: Swapping in, one to one by mass, Magnalium powder for a compositions listed qty of pure of dark flake aluminum powder, never caused any decrease in the stability of the composition in question), but the exothermic output of all the compositions that we have tested, showed that when this Magnalium Powder product is substituted in, one to one, for the mass of Dark Flake Aluminum powder called for in a given or normally used,for this Magnalium Powder, there would be a 200%+ increase in the size, pressure generated, and speed of the reaction being tested.



* This product has been produced from fully alloyed Magnalium Castings.

** This product has passed all stability tests, testing for pre-ignition reactivity when mixed with various chlorate based compositions.

*** This product also has undergone testing, aimed to measure specifically for particles if pure (unalloyed) Magnesium. Each batch of alloyed magnalium castings undergo this specific set of tests. And we have yet to find any unalloyed Magnesium particles, in any batch of this ball-milled Magnalium Powder Product.


Packaging & Shipping

1. Use bags, metal pail, or paper pail to pack, the underlayer are plastic bag.

2. Transport Tool: Trucks or containers.

3. Storage Methods: The storehouse should be ventilated, dry, fire preventing, wet preventing, static preventing and the hermetic goods can be stored for 6 months

Our Services

1. Factory direct supply  

2.Particle size and Package Can customized

3. Strickly quality control system and advanced testing equipments

4.Good aftersale service.

Our Customers
Magnesium powder products are sold to many countries and regions, such as India, the Netherlands, the United States, Canada, South Korea and have established long-term cooperative relationships with well-known foreign companies such as POSCO and OPTA.

 

FAQ

Q1: How does your factory control the quality Magnesium desulfurizer 

Quality is the life of our factory, first, each raw materials, come to our factory, we will test it first, and after each manufacturing step,we will test it, and then all the manufacturing process finished, we will do the final test before the commodities left our factory. 

Q2: How about your service?

We provide 7*12 hours service, and whenever you need, we will always here with you, and besides, we can provide one stop purchasing for you, and when you purchase our commodities, we can arrange testing, custom clearance, and logistic for you! 

Q3: What is the delivery time? 

For small quantity, it will take only 2-4days for delivery, and after large quantity, it will take about 2 weeks.Delivery time mainly depends on the specifications of magnesium powder required by customers